2011 Kia Sorento Door Locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140670
Printed Date: July 05, 2025 at 11:11 AM
Topic: 2011 Kia Sorento Door Locks
Posted By: scprez
Subject: 2011 Kia Sorento Door Locks
Date Posted: January 16, 2016 at 5:17 PM
So ya i have found the Kia Sorento wiring diagram and the lock and unlock wires are not located there. is there anyone that can help me out and finding the lock and unlock wires or will a module like a dball2 with a viper 4105v solve this issue. the remote start works without and type of bypass but i cant seem to get the locks to work.
thanks for any help. im at a loss. looks like i have been out of the remote start game for too long
Replies:
Posted By: chev104275
Date Posted: January 16, 2016 at 7:05 PM
POWER LOCK BLUE/BLACK (TYPE B) @ DASH FUSE BOX, (WHITE, 26-PIN PLUG(FK), PIN 4
POWER UNLOCK GRAY/BLACK (TYPE B), NOTE #7 @ DASH FUSE BOX, (WHITE, 26-PIN PLUG(FK), PIN 24
use the YELLOW/BLACK (-), at the DASH FUSE
BOX, (REAR WHITE, (16-PIN PLUG(MM), PIN 2
I've done a ton of these trucks you will need to split the unlock wire using a diode one goes to the gray/black, other goes to the yellow/black
The yellow/black will test as a ground pulse when the key is turned in the driver's door twice.
-------------
If i Can't Install it I Don't need it Joe
Posted By: scprez
Date Posted: January 16, 2016 at 9:50 PM
so i have to use the key in the door for it to test. and i swear there isnt any blue black or grey black wires in the plug...... and the plug you are referring to is in the back of the fuse box correct?
and can i just connect the blue/blk and gry/blk and unlock all the doors or do i need to use the ylw/blk as well. sry if i sound like a rookie. i havent done an install in a few years
Posted By: chev104275
Date Posted: January 17, 2016 at 12:21 PM
Check out the pictoral section on the forum. I did a 2012 which is the same truck.
-------------
If i Can't Install it I Don't need it Joe
Posted By: scprez
Date Posted: January 17, 2016 at 2:00 PM
ok i will im going at it again on saturday. hopefully get this thing done. i also have to hook up the horn but i dont think that will be too bad. i wasnt worried about that just worried about getting the rest of it done. ill post on here again if i can get it. thank you for the help
Posted By: scprez
Date Posted: January 17, 2016 at 2:05 PM
ahhhhh so the plug is in the front of the fuse box next to the red connector. got it now. i was looking at the back of the fuse box.
Posted By: scprez
Date Posted: January 17, 2016 at 5:27 PM
ok so you r an f'ing god. thank you so much. it is done and the problem was i didnt even look at that harness twice when doing the locks. worked great. car is finished. and she is happy. thank you thank you thank you
Posted By: chev104275
Date Posted: January 18, 2016 at 6:28 AM
No problem Glad it worked out
-------------
If i Can't Install it I Don't need it Joe
|