Automate 4118al programming info needed
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140704
Printed Date: May 13, 2025 at 10:12 PM
Topic: Automate 4118al programming info needed
Posted By: mhipsman
Subject: Automate 4118al programming info needed
Date Posted: January 21, 2016 at 8:37 PM
Does anyone know how to reprogram runtime using fob on a automate
4118al.
Dealer installed unit but refuses to increase run time due to "environmental issues"
Replies:
Posted By: jameselantra
Date Posted: January 22, 2016 at 4:57 PM
Programming is done via the valet button and fob. this is the same remote start as an Avital 4113
Use this manual 4113 manual
Posted By: mhipsman
Date Posted: January 23, 2016 at 1:46 PM
no valet button installed. another model type?
Posted By: jameselantra
Date Posted: January 23, 2016 at 4:26 PM
same model. the valet button is a 2 pin plug in.
im sure that rs is the same as this rs.
You are just missing the button.
Posted By: beegbie
Date Posted: January 25, 2016 at 6:15 PM
4118 is not a 4113. 4118 is a db-all combined with a xl-202 and one button automate remotes. Runtime is controlled by the programming of the db-all. You will need a xk-loader in order to do what your asking. Where are you located?
Posted By: mhipsman
Date Posted: January 25, 2016 at 6:17 PM
Boston MA area
Posted By: beegbie
Date Posted: January 25, 2016 at 6:28 PM
That's what I thought. Can I ask what dealer? They shouldn't be telling you that. If you don't want to post it, send me an email at thestumpjump@gmail.com
Oh, and I just read one of Mr. James Elantra posts that included the quote "This I am 100% sure of. I dont give advice unless Im 100% sure I know what Im saying."
I know your trying to help but it's not helping if you don't know what your talking about. Think before you type.
Posted By: mhipsman
Date Posted: January 27, 2016 at 7:02 PM
The Toyota dealership in Norwood
So I can buy an xle loader and do it myself?
Posted By: beegbie
Date Posted: January 27, 2016 at 8:22 PM
Yup, Amazon has them.
https://www.amazon.com/XpressKit-XKLOADER2-Computer-Programming-tool/dp/B001XTZBHO/ref=sr_1_1?ie=UTF8&qid=1453947668&sr=8-1&keywords=xkloader
With this, you can select anywhere from 1-60 minutes.
Posted By: mhipsman
Date Posted: February 04, 2016 at 6:29 PM
Got the xloader2
But I have some questions.
Looks like I need to reflash firmware?
The options from the website talkabout PTS EIPS being activated by default
Do I need to disable it? Confused on what that function is. It sounds like I should.
2016 Toyota highlander smart start
Thanks
Posted By: beegbie
Date Posted: February 04, 2016 at 8:17 PM
No need to re-flash but it won't hurt anything. Eips was/is an interesting idea but will soon be dropped by diercted for many reasons. You don't want to leave this activated.
Posted By: mhipsman
Date Posted: February 05, 2016 at 6:30 AM
how do I put dball2 in programming mode or does it happen automatically from website
Posted By: mhipsman
Date Posted: February 22, 2016 at 7:19 PM
Still no luck
I cannot get the dball2 to recognize the Xkloader2.
After everything is connected to computer and the express kit website
I go thru website and adjust settings (6 screens)
But I cannot flash firmware. I click refresh button and nothing happens
Any advice?
|