Viper 211hv Horn output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140740
Printed Date: May 12, 2025 at 12:19 AM

Topic: Viper 211hv Horn output

Posted By: juice199421
Subject: Viper 211hv Horn output
Date Posted: January 27, 2016 at 10:21 PM

Hey guy's I just have a Quick question. I am planning on installing a viper 211hv unit in my 1994 ford bronco I have all my wiring for the door locks and the lights figured out I just wanted to know if I need a relay for my horn honk output the manual says its 200mA. I looked at a wiring diagram and it says my horn is negative trigger and my truck dose have a horn relay.

Replies:

Posted By: Mark Mizenko
Date Posted: January 27, 2016 at 10:46 PM

Should be a dark blue wire at the column that is your negative trigger for the horn, just hit that with your brown

Posted By: juice199421
Date Posted: January 28, 2016 at 7:43 AM

Thank you for the reply so just to clarify the brown wire is strong enough to activate the factory relay.

Posted By: geepherder
Date Posted: January 28, 2016 at 10:33 AM

Yes, the 200mA output is designed to drive the factory relay.

-------------
My ex once told me I have a perfect face for radio.

Print Page | Close Window