Print Page | Close Window

93 Altima power window amplifier workaround

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140808
Printed Date: April 28, 2024 at 11:45 PM


Topic: 93 Altima power window amplifier workaround

Posted By: robbiewilso
Subject: 93 Altima power window amplifier workaround
Date Posted: February 07, 2016 at 5:26 PM

After some research I have found that I have bad "amplifiers" for my power windows on my 93 Altima. I have found replacements but at over $100 each they are cost prohibitive. Evidently the amplifier is an electronic relay. I have traced the wiring back and have id'd the power window motor wires, the main power wires, and the wires going to the window up/down switch. The window switch provides continuity to the "amplifier" to 2 different wires when the switch is pressed in the up and down direction, and uses a common wire to complete continuity. My question is: how to duplicate the function of the amplifier using 12v relays or other tricks. Thanks to any who reads this and understands my needs, and has solutions! Thanks!

-------------
RoBBiE WiLsO



Replies:

Posted By: geepherder
Date Posted: February 07, 2016 at 7:04 PM
Sounds similar to a 5-wire door lock application: https://www.the12volt.com/doorlocks/page3.asp#5w

-------------
My ex once told me I have a perfect face for radio.




Posted By: mscguy
Date Posted: February 07, 2016 at 8:26 PM
Could you do what this guy did?

https://www.240sxforums.com/forums/general-tech/146617-how-fix-your-power-windows-ditch-amp.html

Not an altima, but still a Nissan. Same principle.

Also, yes, similar to a 5 wire door lock as per Geep's post.




Posted By: robbiewilso
Date Posted: February 08, 2016 at 6:03 AM
Yes I scoured the web and found the post you mention. His application is similar and gave me some ideas. I was just hoping I could find someone who had the exact application and devised a workaround and I could just clone their system. I'm lazy :) and not the genius at wiring I think I am.

-------------
RoBBiE WiLsO





Print Page | Close Window