Proper way to test 200mA - output?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140856
Printed Date: May 15, 2025 at 12:21 PM

Topic: Proper way to test 200mA - output?

Posted By: cds333
Subject: Proper way to test 200mA - output?
Date Posted: February 16, 2016 at 9:16 AM

Using a meter or oscilloscope, what would be the proper way to test the 200mA (-) output of a remote start for voltage and/or current?

Thanks!

Replies:

Posted By: cds333
Date Posted: February 16, 2016 at 10:09 AM

Nevermind! It seems Avital remote starts will not process an unlock command if it thinks the doors are already locked. It will however flash the lights. Had to hook all 3 outputs up to the logic analyzer before I saw the pattern.

Print Page | Close Window