Print Page | Close Window

2008 Prius PTS

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140871
Printed Date: March 28, 2024 at 7:34 PM


Topic: 2008 Prius PTS

Posted By: triniforever
Subject: 2008 Prius PTS
Date Posted: February 18, 2016 at 6:54 PM

Hello everyone, i have a 2008 Prius to do a remote start on, i'll be using the ALCA the install does not look to difficult however my question is Idatalink said to use two relays and 5 diodes to do the doorlocks ,i looked up the specs and it says the lock an unlock are straight negative trigger or are they something different ? Has anyone done this car and can explain what Idatalink is refering too?

-------------
triniforever



Replies:

Posted By: Mark Mizenko
Date Posted: February 18, 2016 at 10:13 PM
You'll need 2 relays and 3 diodes to do the remote start. Then you'll want to do unlock with your remote start fob, cause the oem won't work during RS. You'll need 2 more diodes for the unlock part of the install. Hence the 2 relays 1 for brake, 1 for the keyport, and the 5 diodes. Just follow the diagram, very simple install. Just did one today, the top part above/around the wheel comes off, lots of room there.




Posted By: triniforever
Date Posted: February 18, 2016 at 10:45 PM
Thanks very much Mark .

-------------
triniforever





Print Page | Close Window