2015 camry dball2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140880
Printed Date: May 05, 2024 at 12:22 PM
Topic: 2015 camry dball2
Posted By: camryman76
Subject: 2015 camry dball2
Date Posted: February 20, 2016 at 3:31 PM
I have installed the code alarm ca5153+dball2 into a 2015 camry H key. I am have a few issues. the door locks will not work with the ign key off. The dball is seeing the lock and unlock from the alarm because it has an led to show that signal. when I remote start with the code alarm it works great. and if the car is running the keyless starts working. when you cut off the remote start or the key the code alarm's lock and unlock doesn't work. It is acting like the BCS is in a sleep mode. It works great with the key on. I have went over all the wiring and everything is to the correct wires per TL10 wiring diagram. It has me scratching my head. any help will be greatly appreciated!!
Replies:
Posted By: beegbie
Date Posted: February 20, 2016 at 7:49 PM
The db-all controls the door locks through the rda wire when the car is off and through the can wires when the ignition is on. How confident are you in your rda connection? Describe the pin location and wire color of your rda connection please.
Posted By: camryman76
Date Posted: February 20, 2016 at 8:32 PM
That make more since. I will have to check the connection tomorrow.
|