Viper 4806v unlocking while driving?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140913
Printed Date: April 27, 2024 at 1:59 PM
Topic: Viper 4806v unlocking while driving?
Posted By: 04toyotaco
Subject: Viper 4806v unlocking while driving?
Date Posted: February 24, 2016 at 8:39 PM
After I failed to install my remote start I took it to RadioShack to finish it. They said everything worked as it should except for the lock and unlock. Left it at that. They said the brain was probably friend from something I did or it was a manufacture mistake. I contacted viper. They said they would fix it for $45 because it isn't under warranty. At this point I went back and looked at it myself. I managed to hook up the wires and the truck locks and unlocks perfect. So as I was driving I noticed that my doors kept trying to unlock at random intervals. No locking just unlocking. And quite a bit enough to annoy me. I thought my connection may have been a little loose to I went back in and redid it and made sure it was tight then drove it again and it happened again. However, when I gave up for the day, I turned the truck off, got out, locked it using the remote, waited to see if it would unlock and it didn't. Went back a couple hours later and still didn't. So it only happens when the truck is running. Any suggestions before I send it in and spend more money???
Replies:
Posted By: 04toyotaco
Date Posted: February 24, 2016 at 8:40 PM
2004 Toyota Tacoma sr5 v6
Posted By: triniforever
Date Posted: February 24, 2016 at 9:34 PM
Radio Shack installs alarms ? Hmm never knew that .
-------------
triniforever
|