Problem in installing central lock for alarm sys

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140918
Printed Date: May 13, 2025 at 11:30 AM

Topic: Problem in installing central lock for alarm sys

Posted By: nissansentra
Subject: Problem in installing central lock for alarm sys
Date Posted: February 26, 2016 at 7:51 AM

Hi, I have purchase a alarm system for my Nissan b14, all is working properly except the central locking, I have install a new actuator 2 wire( green and blue, I have wired ORANGE / black from the alarm to the actuator green wire and connect ORANGE / white to blue wire from the actuator, but it is not working. How can I get the actuator work and I have attach the wiring diagram of the module

Please help me,

Thanks,

posted_image

Replies:

Posted By: rs specialist
Date Posted: February 26, 2016 at 10:16 AM

Did you add door lock actuators to the vehicle?
The alarm has negative outputs.

Posted By: nissansentra
Date Posted: February 26, 2016 at 10:27 AM

yes I have buy a new one

Can you tell me how to connect it

Posted By: howie ll
Date Posted: February 26, 2016 at 1:20 PM

Look in the relay section, add actuators, it's the exact wiring you'll need.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: nissansentra
Date Posted: February 26, 2016 at 11:16 PM

That mean my alarm system is not compatible with the actuator?

Isn't a way to get it work?

Posted By: howie ll
Date Posted: February 27, 2016 at 12:17 AM

Yes, add the relays.
Your system is compatible with most OEM central locking systems, adding an actuator requires a system with either built in relays or adding relays.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: nissansentra
Date Posted: February 27, 2016 at 1:08 AM

I have an relay that I have get it together with the alarm system for ignition , its 961A-1B-12DM 40A.

Can I used this relay?

Posted By: howie ll
Date Posted: February 27, 2016 at 1:10 AM

You will need two of them.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: nissansentra
Date Posted: February 27, 2016 at 1:17 AM

Can you tell me what the 2 relay to buy and how to wired it please

Posted By: howie ll
Date Posted: February 27, 2016 at 1:19 AM

I gave you the answer already, check above.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: the12volt
Date Posted: February 27, 2016 at 8:28 AM

https://www.the12volt.com/relays/relaydiagram48.html

-------------
posted_image

the12volt • Support the12volt.com