2006 f250 adding keyless entry
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141026
Printed Date: May 04, 2024 at 1:17 AM
Topic: 2006 f250 adding keyless entry
Posted By: lweingart
Subject: 2006 f250 adding keyless entry
Date Posted: March 16, 2016 at 6:06 PM
I have a 4 door 2006 f250 with out factory keyless entry. I'm trying to install a directed pke system but I'm stumped.
The truck has 5 wire reverse polarity negitve trigger door locks.
I'm pretty sure I found the right diagram for the 2 relays but I need to know what wire is the master switch to cut.
Can anyone help me out?
Replies:
Posted By: chev104275
Date Posted: March 16, 2016 at 7:44 PM
MAKE : FORD | MODEL : F250 | YEAR : 2006
Power Lock pink / YELLOW (w/o keyless); 5wire driver kick, door harness
Power Unlock pink/lt. grn (w/o keyless); 5wire driver kick, door harness
-------------
If i Can't Install it I Don't need it Joe
Posted By: lweingart
Date Posted: March 16, 2016 at 7:47 PM
If I cut these wires how do I know which end goes to the switch and what ends goes to the motor?
Posted By: smokeman1
Date Posted: March 16, 2016 at 8:26 PM
In the download section is a pdf file for door lock systems, df 1041
it has a good explanation of type c locks and wire testing.
https://www.the12volt.com/installbay/downloads.asp?srch=all&term=1041
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: lweingart
Date Posted: March 16, 2016 at 9:20 PM
Ok I cut the wires in the drivers kick panel and temporarily wired them into the relays. Every thing seems to work except that the remote is supposed to unlock the doors but it locks them instead. There's is only one button on the fob and it's a unlock button.
Posted By: smokeman1
Date Posted: March 16, 2016 at 9:46 PM
Try reversing your setup
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: lweingart
Date Posted: March 16, 2016 at 9:58 PM
The weird thing is that when i walk up to the truck it unlocks and when I walk away it locks just like it should. It's just the fob that is reversed.
Posted By: rs specialist
Date Posted: March 18, 2016 at 12:30 PM
if you press the button on the PKE it will send a lock pulse, if you press and hold the button for abot 3-5 seconds it will send an unlock command.
|