2006 Chevy Malibu Maxx, Avital 5303, DBALL2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141078
Printed Date: May 15, 2025 at 12:39 PM
Topic: 2006 Chevy Malibu Maxx, Avital 5303, DBALL2
Posted By: killerpoptart
Subject: 2006 Chevy Malibu Maxx, Avital 5303, DBALL2
Date Posted: March 24, 2016 at 9:53 AM
Does anyone happen to have the direct techs wiring information for the Avital 5303 and DBALL2, for a 2006 Chevy Malibu Maxx. I mostly just need the Avital wiring but both would be greatly appreciated, Thanks.
Replies:
Posted By: smokeman1
Date Posted: March 24, 2016 at 9:27 PM
https://www.directechs.com/VehicleCompatibility.aspx?p=-1&year=2006&make=Chevrolet&model=Malibu%20MAXX&ps=1&s=0&c=0
https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: killerpoptart
Date Posted: March 25, 2016 at 4:59 AM
Thanks for the information, but I had found most of those connects. Here is what I have and don't have.
https://goo.gl/zNVYri - Excel doc
Vehicle Information: 2006 Chevy Malibu Maxx
Alarm / Remote Start Unit: Avital 5303
Bypass Module: DBALL2
Alarm / Remote Start / Bypass Unit Vehicle
Connection Color Description Color Polarity Location:
Main Harness (H1), 12-pin connector
H1/1 RED / WHITE (-) 200mA AUX TRUNK RELEASE OUTPUT BROWN / WHITE (-) BCM, C1, 72PIN GRAY PLUG, PIN 71
H1/2 RED (+) CONSTANT POWER INPUT Red (+) BCM, C3 RED 41PIN PLUG, PIN D1
H1/3 BROWN (+) SIREN OUTPUT Goes to positive on siren
H1/4 NOT USED NOT USED not used not used not used
H1/5 BLACK (-) CHASSIS GROUND INPUT (-) ground
H1/6 VIOLET (+) DOOR TRIGGER INPUT, ZONE 3
H1/7 BLUE (-) INSTANT TRIGGER INPUT, ZONE 1
H1/8 GREEN (-) DOOR TRIGGER INPUT, ZONE 3
H1/9 BLACK/ WHITE (-) 200mA DOMELIGHT SUPERVISION OUTPUT BCM, C3, 41PIN
H1/10 WHITE/ BLUE (-) REMOTE START ACTIVATION INPUT
H1/11 WHITE (+)/(-) SELECTABLE LIGHT FLASH OUTPUT
H1/12 ORANGE (-) 500mA GROUND WHEN ARMED OUTPUT
H2 Harness, 6-pin connector
H2/1 BLUE (-) 200mA SECOND UNLOCK OUTPUT
H2/2 WHITE/ BLACK (-) 200mA AUX 3 OUTPUT Optional Aux option
H2/3 VIOLET/BLACK (-) 200mA AUX 2 OUTPUT Optional Aux option
H2/4 GREEN / WHITE (-) 200mA FACTORY ALARM REARM OUTPUT
H2/5 GRAY/BLACK (-) WAIT-TO-START INPUT not needed
H2/6 LIGHT GREEN/ BLACK (-) 200mA FACTORY ALARM DISARM OUTPUT
H3 Harness Remote Start, 5-pin connector
H3/1 BLACK/ WHITE (-) NEUTRAL SAFETY SWITCH INPUT Provided switch with other end to ground when park or neutral ?
H3/2 VIOLET/WHITE TACHOMETER INPUT WIRE negetive side of ignition coil / ANY FUELINJECTOR
H3/3 BROWN (+) BRAKE SHUTDOWN INPUT WIRE BCM, C1 72PIN GRAY PLUG, PIN 42,
H3/4 GRAY (-) HOOD PIN SWITCH INPUT, ZONE 6 Hood pin switch
H3/5 BLUE/WHITE (-) 200 mA 2ND STATUS/REAR DEFOGGER - Latched Pulsed
H4 AUX 4/Horn, 2-pin connector
H4/1 ORANGE / BLACK (-) 200mA AUX 4 OUTPUT Optional aux option
H4/2 BROWN (-) 200 mA HORN OUTPUT
Door Lock, 3-pin connector
1 BLUE (-) UNLOCK OUTPUT
2 NOT USED NOT USED NO USED NOT USED NOT USED
3 GREEN (-) LOCK OUTPUT
Heavy gauge relay satellite
H/1 PURPLE STARTER OUTPUT TO STARTER (STARTER SIDE) ignition switch starter side of cut starter wire
H/2 GREEN STARTER INPUT FROM IGNITION SWITCH (KEY SIDE) ignition switch key side of cut starter wire
H/3 RED (+) 30A HIGH CURRENT 12V INPUT red red 12v at ignition switch
H/4 ORANGE OUTPUT TO ACCESSORY CIRCUIT brown (+) Pin 4 ignition switch
H/5 RED (+) (30A) HIGH CURRENT 12V INPUT
H/6 PINK OUTPUT TO PRIMARY IGNITION CIRCUIT Pink or Yellow (+) Pin 3 ingnition switch
H/7 RED / WHITE (+) (30A) HIGH CURRENT 12V INPUT if no 2nd ignition/accessory, then this wire is not needed
H/8 PINK/WHITE OUTPUT TO SECOND IGNITION/ACCESSORY CIRCUIT
Relay satellite 4-pin connector
1 BLUE (-) 200mA STATUS OUTPUT
2 ORANGE (-) 200mA ACCESSORY RELAY TURN ON
3 PURPLE (-) 200mA STARTER RELAY TURN ON
4 PINK (-) 200mA IGNITION RELAY TURN ON
Remote Start ribbon harness
connects satellite relay to main unit
DBALL2
Blue Harness
1 Light Green Single Wire CAN Dark Green pin 1 of OBD2 from pin side
10 ORANGE / Red Immo. Constant (Car Side) RED / White Black Connector located at the ignition switch
11 Yellow/Red Immo. Constant (Conn. Side) RED / White Black Connector located at the ignition switch
13 not needed with D2D - - -
14 not needed with D2D - - -
Red Harness
1 BLACK/ White Drive door trigger
7 Gray/Black (+) Accessory Output Brown (+) Accessory, pin 4
10 Yellow/Black Keyless Data Tan/White or Light Green BCM connector C2 pin 12
Black Harness
Not needed with D2D cable
|