2016 Camry PTS light issue
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141088
Printed Date: November 04, 2025 at 6:59 AM
Topic: 2016 Camry PTS light issue
Posted By: dts828
Subject: 2016 Camry PTS light issue
Date Posted: March 26, 2016 at 11:20 AM
Installed standalone remote start using idatalink ads_alca module, works fine but parking lights are not on when car is remote started, connected to pin 30 black wire/ecu white 30pin plug. After checking found they work if headlight switch is in drl/off position but they don't work if the switch is in the auto position. Has anyone come across this, any where else to hook the negative output for parking lights that will work when the light switch is in auto position.
Replies:
Posted By: brownsfan1
Date Posted: March 26, 2016 at 7:34 PM
It won't work if you use negative park lights. You need to use the positive park lights to work when in the auto position. Pink wire in a white 36 pin plug at the dash fuse box.
Posted By: brownsfan1
Date Posted: March 26, 2016 at 7:34 PM
It won't work if you use negative park lights. You need to use the positive park lights to work when in the auto position. Pink wire in a white 36 pin plug at the dash fuse box.
Posted By: dts828
Date Posted: March 29, 2016 at 8:12 PM
brownsfan1 wrote:
It won't work if you use negative park lights. You need to use the positive park lights to work when in the auto position. Pink wire in a white 36 pin plug at the dash fuse box.
Thanks for the solution.
|