2014 Chevy Express 2500, APS57E, FLCAN
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141104
Printed Date: May 04, 2024 at 2:22 PM
Topic: 2014 Chevy Express 2500, APS57E, FLCAN
Posted By: oleg4
Subject: 2014 Chevy Express 2500, APS57E, FLCAN
Date Posted: March 29, 2016 at 10:32 PM
Hi installed a APS57E remote start and used FLCAN with DL-GM10 software Thru DBI.
Everything works(car starts, unlocking and locking works)
but when i hit unlock (while engine running or not) it seams it puts the car ignition into run state for split second( same as turning the key to ignition on)
but when i hit the unlock second time it unlocks the car.
Is it normal or something is wrong?
Here is the diagram how i connected the flcan and the starter flcan
Everything works(car starts, unlocking and locking works)
but when i hit unlock (while engine running or not) it seams it puts the car ignition into run state for split second( same as turning the key to ignition on)
but when i hit the unlock second time it unlocks the car.
Is it normal or something is wrong?
Here is the diagram how i connected the flcan and the starter flcan
Replies:
Posted By: pts760
Date Posted: April 01, 2016 at 3:42 PM