VW Blade Al
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141140
Printed Date: May 03, 2024 at 8:29 PM
Topic: VW Blade Al
Posted By: kubota832
Subject: VW Blade Al
Date Posted: April 08, 2016 at 8:36 AM
Hello,
I just installed a CM7200 remote start in a 2013 VW Tiguan. I'm having a few issues with the OEM alarm.
1) Locking doors it works fine. OK
2) Un-locking doors it works fine BUT the car will re-arm itself in 3 seconds.
3) The remote start works BUT it would shut down as soon as it starts because the oem alarm would re-arm itself right when it starts up.
I have tried all kinds of settings just can't figure it out.
I'm using a 556u box to store a key and the blue wire from the 556u is hooked up to the POC#8 on the CN5 hardness pin number 15 Status out.
I can't figure out why the OEM alarm would re-arm itself after a few seconds.
Would deeply appreciate any help given. Thanks Andy
Replies:
Posted By: kubota832
Date Posted: April 11, 2016 at 4:11 AM
Issue was resolved... I found the problem. It works great.
Posted By: prdjr165
Date Posted: April 11, 2016 at 3:51 PM
tell us what the problem was..
Posted By: mcnugget
Date Posted: April 12, 2016 at 1:08 PM
What was the problem?
|