Problem with Performance Teknique ICBM-7071
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141172
Printed Date: October 31, 2025 at 1:40 PM
Topic: Problem with Performance Teknique ICBM-7071
Posted By: zauce
Subject: Problem with Performance Teknique ICBM-7071
Date Posted: April 15, 2016 at 9:34 PM
Hi guys. Fresh newbie here. I'm a DIYer and I'm trying to install a Performance Teknique ICBM-7071 Alarm with remote start in a Nissan Urvan E25 Panel Van. I've gotten the alarm partially installed and the door pins and shock sensor are functional with the alarm siren but I'm having issues with the power lock wiring diagram and also I haven't gotten the remote start to work as yet so I'm doing something wrong somewhere. The power locks on the front doors and sliding doors are after-market actuators which I installed myself and they are fully functional with the LOCK/UNLOCK switch which I also installed myself but I'm having problems connecting the six wires from the alarm which control the door lock/unlock feature when the alarm is armed. Anyone familiar with this alarm and can offer me some advice?
-------------
PARTY ANIMAL LIGHTING
Replies:
Posted By: zauce
Date Posted: April 15, 2016 at 9:54 PM
2008 Nissan Urvan E25 5 forward manual transmission Panel Van with Nissan ZD30 diesel engine.
-------------
PARTY ANIMAL LIGHTING
|