does flashing DBALL require directechs login now
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141208
Printed Date: November 03, 2025 at 10:10 PM
Topic: does flashing DBALL require directechs login now
Posted By: crvz
Subject: does flashing DBALL require directechs login now
Date Posted: April 28, 2016 at 9:53 AM
I'm working to get a viper 5706 alarm with the dball2 installed on my 2016 tacoma. I was starting to flash the dball2 for the proper firmware, and it was taking me to a directechs page requesting me to login. Is that required now to flash these units? I've done this in the past (last time was about 2 years back) and didnt have an issue, so while I'm using a new computer is this an issue on my computer side or will it really require me to have a directechs login?
Replies:
Posted By: kreg357
Date Posted: April 28, 2016 at 10:07 AM
Nope, just a user login. It is a new WEB page...
-------------
Soldering is fun!
Posted By: timmerk
Date Posted: May 01, 2016 at 12:29 AM
Their new website isn't letting me register, despite the fact they say that even if I'm not in their system, I will still have access to flashing and forums. I've emailed them asking them what is going on, but no reply.
Posted By: crvz
Date Posted: May 01, 2016 at 6:56 AM
It wouldn't work for me either with a yahoo email account, I used my work email and it went through. They may be blocking out some of the more common email services.
Posted By: timmerk
Date Posted: May 04, 2016 at 9:08 PM
crvz, good call. I tried with a non-free email, and it worked, so I guess their own customer service has no idea about anything. What a doodiety company!
|