Viper alarm issues
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141257
Printed Date: April 26, 2024 at 7:21 PM
Topic: Viper alarm issues
Posted By: rhegg2006
Subject: Viper alarm issues
Date Posted: May 07, 2016 at 8:02 AM
Hello,
I was wondering if some people can help me troubleshoot in the right direction. I have my viper alarm for about 6 years now and recently the battery got drain and I had to replace the battery. When I replace the battery my remote start won't work it's tries to start three times and fail. Also the door locks don't work any more it won't lock or unlock the car with the viper remote. It will however lock and unlock with my factory key. If I arm the vehicle the alarm still works.
I check and all the fuses are good in the car. I am not certain if I need it reprogram or just get a new one?
Thanks in advance for your advice.
Rhegg
Replies:
Posted By: rhegg2006
Date Posted: May 07, 2016 at 8:03 AM
Also the car is a Mazda 3 2010 and I believe the viper alarm is 5701. Thanks
Posted By: smokeman1
Date Posted: May 07, 2016 at 9:20 PM
What bypass is used?
I had one DB-ALL loose it programming after a car battery was replaced after going completely dead.
Had to reprogram the module
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: rhegg2006
Date Posted: May 07, 2016 at 9:24 PM
Smokeman1 funny thing you say that I went ahead and got with a local installer today and he had to reprogram the alarm. He even gave me the instruction if it ever happen to me again. Thanks everyone for your support I consider this problem solved.
|