viper 5706v in truck viper 3606v in trailer
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141424
Printed Date: April 28, 2024 at 7:48 AM
Topic: viper 5706v in truck viper 3606v in trailer
Posted By: drpitlikeitssco
Subject: viper 5706v in truck viper 3606v in trailer
Date Posted: June 22, 2016 at 8:51 PM
I have a viper 5706v installed in my truck. i have an enclosed trailer that I would like to add a viper 3606v to. I have a question. I understand that there are a car 1 and car 2 mode on my 2 way remote that came with the 5706 but what I'm trying to figure out is if I have my remote programmed to both "cars" and i am in car 1 mode on the remote and car 2s (my trailer) alarm goes off will i still be notified on my remote even though i'm in car 1 mode? thanks!!
Replies:
Posted By: freqsounds
Date Posted: August 10, 2016 at 9:58 PM
Yes, it should automatically switch over. But the remote will most likely stay in car2 mode after the alarm goes off.
I recently did the same to my enclosed trailer. I used a home siren (Honeywell 747) instead of the DEI horn. It gives a unique sound, but I don't think it's loud enough. I added two blue top Optima's and two 12v 100w solar panels with an MPPT controller configured in series (charges at ~26A@12V). While I was at it, I threw in a GPS tracker and some dome lights that trigger when the doors are opened and 3-way wall switches. It has been too hot to finish it, but pics coming soon!
-------------
No question is stupid or not worth asking. You were once a noob, right? :)
|