Print Page | Close Window

2010 Chev. Suburban install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141449
Printed Date: May 01, 2024 at 6:10 PM


Topic: 2010 Chev. Suburban install

Posted By: libfiremedic
Subject: 2010 Chev. Suburban install
Date Posted: June 28, 2016 at 9:25 PM

I installed my python PS3000 in my 2010 Chev. Suburban... I had previously installed it in my 2010 Dodge Ram 1500. This time I used a DBALL for the bypass mod. Only issue is that the alarm only has 1 D2D port... How do I install the DBALL W2W instead of D2D... I just can't seem to wrap my head around how.



Replies:

Posted By: rs specialist
Date Posted: June 29, 2016 at 2:11 PM
You literally wire the ins and outs from the alarm to the bypass. W2W means wire to wire.


Print Page | Close Window