2008 nissan versa, 545t

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141609
Printed Date: May 02, 2024 at 6:46 PM

Topic: 2008 nissan versa, 545t

Posted By: ricardoboston
Subject: 2008 nissan versa, 545t
Date Posted: August 13, 2016 at 7:47 PM

Help please LOL, guys I'm going crazy with my wife's car I'm trying to get the auto lights installed but it has been a pain on the butt,i bought a 545t nite-lite from DEI but i can't get it connected the right way i think i missed something cause the parking light won't work i have the red 12v,black ground ,yellow ignition also the violet/black from the relay to the constant12 v power and the blue/black to the gray wire on the driver kick panel and for headlights i put the violet from the relay harness to constant 12 v power and the GREEN/ black to the pink wire inside the engine IPDM but there theres 2 headlight wires pink R and blue L i have it only connected to one wire pink R i don't know if i should have it connected to the blue L as well?? i have it hooked up only on the pink but both headlights its working on good . right now the headlights its working but the back of the car everything is off,can you guys help me on this one please i really appreciate it. posted_image

Replies:

Posted By: lurch228
Date Posted: August 13, 2016 at 9:16 PM

Here is the diagram.

posted_image

Posted By: lurch228
Date Posted: August 13, 2016 at 9:26 PM

I don't see where you listed that you hooked the Brown parking light input to 12v constant.

Posted By: ricardoboston
Date Posted: August 14, 2016 at 6:13 AM

hi lurch228 my diagram its different from your on my they listed violet/black for parking light relay input ,i get it connected to 12volts,i don't know why don't work ,thanks for your info.

Posted By: lurch228
Date Posted: August 14, 2016 at 2:59 PM

Upon reading again you list the Black as being connected to 12v Shouldn't it be connected to chassis ground?
Sounds like you have the version that has the same wiring colors as the 451M has. So for positive activation you would hook the violet and violet/black to 12v constant. Other side of relay for the violet would be the Blue/Black, And for the Violet/Black would be the GREEN/ Black.
Ignition input should be connected to Switched ignition source.