“No Remote Start” Condition in D2D Mode
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141669
Printed Date: May 05, 2025 at 11:14 AM
Topic: “No Remote Start” Condition in D2D Mode
Posted By: lurch228
Subject: “No Remote Start” Condition in D2D Mode
Date Posted: September 01, 2016 at 12:10 AM
TB118 “No Remote Start” Condition in D2D Mode
2-16
P/N Brand Implementation
Date Code
QTR & YR Shipping
to Dealers
4105V Viper 15E Q3 2015
4115V Viper 15E Q3 2015
4706V Viper 15G Q3 2015
4806V Viper 15G Q3 2015
5706V Viper 15G Q3 2015
5906V Viper 15G Q3 2015
V415BF Viper 15E Q3 2015
V5868F Viper 15G Q3 2015
4606V Viper 15F Q3 2015
4205V Viper 15E Q4 2015
5806V Viper 15G Q4 2015
4115V1 Viper 15E Q4 2015
5606V Viper 15G Q4 2015
5706X Clifford 15G Q4 2015
4105X Clifford 15E Q4 2015
4115X Clifford 15E Q4 2015
5806X Clifford 15G Q4 2015
4205X Clifford 15E Q4 2015
4706X Clifford 15G Q4 2015
4806X Clifford 15G Q4 2015
4606X Clifford 15F Q1 2016
5606X Clifford 15G Q1 2016
5906X Clifford 15G Q1 2016
4103P Python 15E Q3 2015
5706P Python 15G Q3 2015
4111P Python 15E Q3 2015
4205P Python 15E Q4 2015
4606P Python 15F Q4 2015
4806P Python 15G 2Q 2015
5806P Python 15G Q1 2016
5906P Python 15G Q3 2016
4103LX Avital 15E Q3 2015
4113LX Avital 15E Q3 2015
4003L Avital 15E Q3 2015
No Start Condition in D2D Mode with Entry-Level remote starters
Tech Bulletin Link: https://www.directechs.com/repository/Docs/TechTips/TB118.pdf
SUMMARY:
Some entry-level remote starters (4x03, 4x05, 5x03, etc.) installed with an interface in D2D mode may experience a condition in which the remote start does not activate.
SYMPTOMS:
Vehicle does not remote start. If the remote starter or interface module are power cycled or the shutdown zone inputs are manually cycled (i.e. hood is opened and closed), vehicle may remote start successfully for some time until the condition resurfaces.
Remote start shutdown diagnostics may report hood open or brake active erroneously.
SOLUTION (QUICK):
Make the analog (wired) tachometer connection to the remote starter and program tach. The parking lights should flash once (x1) upon releasing the valet/program switch to confirm a wired tach connection has been learned. If the parking lights flash twice (x2), uncheck the “RS-Request RPM” box in your interface module’s D2D Options configuration page on the web, click “Save” or “Flash” and retry the tach learning procedure.
SOLUTION (LONG TERM):
As of the publish date of this bulletin, a permanent fix has been implemented on the affected remote starter platforms. Please verify with the revised tech bulletin the date code on the unit in question.
|