5902 Outputs

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141675
Printed Date: May 04, 2025 at 9:08 PM

Topic: 5902 Outputs

Posted By: stanward
Subject: 5902 Outputs
Date Posted: September 02, 2016 at 2:22 AM

Hello,

I do not understand the functions of these wires on the 5902 alarm:

H2/11 Flex Relay Control Output
H2/12 Accessory Output
H2/13 Starter Output
H2/14 Ignition 1 Output

Are they all just extra outputs in case one needs additional outputs (utilizing relays for each)?

Thanks,

Stan

Replies:

Posted By: lurch228
Date Posted: September 02, 2016 at 2:52 AM

Yes they are additional low draw negative outputs to control relays or control other devices that need to operate at the same time as the on-board relays. like using the Accessory output to power a relay for a second accessory on vehicles that have 2 ignitions and 2 accessory that need to be powered for remote start, since the flex relay would be used for the second ignition.

Posted By: stanward
Date Posted: September 02, 2016 at 3:17 AM

Thank you lurch!

I was also confused when seeing the alarm has a built-in Flex Relay (Ignition 2) and then there is the "Flex Relay Control Output".

lurch228 wrote:

Yes they are additional low draw negative outputs to control relays or control other devices that need to operate at the same time as the on-board relays. like using the Accessory output to power a relay for a second accessory on vehicles that have 2 ignitions and 2 accessory that need to be powered for remote start, since the flex relay would be used for the second ignition.

Posted By: lurch228
Date Posted: September 02, 2016 at 3:27 AM

No problem