5902 Install door unlocking

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141690
Printed Date: May 01, 2025 at 8:51 PM

Topic: 5902 Install door unlocking

Posted By: stanward
Subject: 5902 Install door unlocking
Date Posted: September 06, 2016 at 10:04 PM

Hello,

I am installing a Clifford 5902 with twin 535t window units and DBall2 into a 2005 Nissan Frontier.

Everything works fine, except when I vent the Windows after arming, the dome lights come on for 15-30 seconds(estimate, did not time them) but luckily it doesn't trigger the alarm.

Also, when venting the Windows (for a 2nd time) after arming the alarm, all the doors unlock.

Replies:

Posted By: stanward
Date Posted: September 07, 2016 at 12:02 AM

Nevermind, I figured it out. I shouldn't have hooked up the OEM alarm arm and OEM alarm disarm wires.

Posted By: lurch228
Date Posted: September 07, 2016 at 12:17 AM

What did you hook them up to so as to help the next person that has this issue?

Posted By: stanward
Date Posted: September 07, 2016 at 12:24 AM

lurch228 wrote:

What did you hook them up to so as to help the next person that has this issue?

Hello lurch,

I did connect the power lock and power unlock wires.

I also connected the "OEM alarm arm output" to the "factory alarm arm" wire at the BCM.
I also connected the "OEM alarm disarm output" to the "factory alarm disarm" wire at the BCM.
I disconnected the two wires and the alarm works perfectly now.

I believe Nissan has the factory alarm arms (when the doors lock) and the factory alarm disarms (when the doors unlock).

Hope this helps someone.

Posted By: lurch228
Date Posted: September 07, 2016 at 2:10 AM

Thanks for your reply.