Print Page | Close Window

2016 Hyundai Santa Fe Sport EM11 CMS COM DBALL2

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141811
Printed Date: May 13, 2024 at 3:21 PM


Topic: 2016 Hyundai Santa Fe Sport EM11 CMS COM DBALL2

Posted By: thegamemaster
Subject: 2016 Hyundai Santa Fe Sport EM11 CMS COM DBALL2
Date Posted: October 02, 2016 at 8:22 PM

The wire for CMS COM in the dball2 instructions does not exsist at pin32 in the EM11 connector on my Hyundai Santa Fe Sport (non-smart key). Does anyone know what wire in the EM11 connector is the CMS COM wire so I can finish installing the DBALL2?

Thanks,

Rodney



Replies:

Posted By: thegamemaster
Date Posted: October 02, 2016 at 9:08 PM
Okay, silly me, I was looking at the connector backwards. So there is a wire in pin32. But it's brown. For the HK3 diagrams for the dball2 it says it's supposed to be blue. And for the HYUNDAI4 diagrams for the dball2 (the ones for the smart key version, which I don't have) say it is supposed to be a WHITE/ orange wire. So neither on matches, as it's brown. Any help would be appreciated.

Rodney




Posted By: thegamemaster
Date Posted: October 04, 2016 at 3:51 PM
Ok, so I didn't get any help from Directed, just them saying, "its a blue wire in pin 32", which it is not.   So I just finished the install without hooking up CMS COM.   It works!   So the basic model sport must not have an imobileizer. Working now.

Rodney





Print Page | Close Window