Wait to start, Viper 4105V

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141867
Printed Date: May 10, 2025 at 2:42 PM

Topic: Wait to start, Viper 4105V

Posted By: lorenzj8
Subject: Wait to start, Viper 4105V
Date Posted: October 16, 2016 at 11:36 AM

I am installing a Viper 4105V in a 98 K2500 with the 6.5 turbo diesel. Can't locate information regarding the proper diode to use on the wait to start wire. Also, without sounding stupid, which wire from the unit connects to this wire? It has been several years since I have installed.

Thank you for the help!

Replies:

Posted By: kreg357
Date Posted: October 16, 2016 at 6:23 PM

I don't believe that the Viper 4105V has a Wait to Start wire. On the 4105 it's strictly a fixed delay timer. See the Menu 2,
Option 10 programming settings. Additionally, if you have a BitWriter you can program a more exact delay ( like 8 seconds )
rather than the standard 15, 30 or 45 second delays.

-------------
Soldering is fun!

Print Page | Close Window