Flash Hazards Keyless Entry Cirrus
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14190
Printed Date: July 06, 2025 at 5:28 AM
Topic: Flash Hazards Keyless Entry Cirrus
Posted By: danwaite
Subject: Flash Hazards Keyless Entry Cirrus
Date Posted: May 30, 2003 at 8:26 AM
Is there a way I can get the lights to flash when I lock/unlock the doors with a 98 Chyrsler with stock keyless entry. Thanks
Replies:
Posted By: djfearny2
Date Posted: May 30, 2003 at 12:03 PM
if the horn beeps maybe but you have to let us know.
-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
Posted By: danwaite
Date Posted: May 30, 2003 at 12:42 PM
It beeps when you lock it.
Posted By: Chris Luongo
Date Posted: June 01, 2003 at 6:35 PM
Sometimes the dealer can enter programming and turn certain features on and off....check out your owner's manual or ask the dealer if parking light flash is possible.
It would also be pretty easy to make your parking lights flash whenever the car is locked or unlocked, if you don't mind doing a little wiring. You could use the motor wires going to the lock actuators, and use them to trigger a relay to pulse the parking or hazard lights. The only quirk is that they'll also pulse the lights even when you lock the doors without the remote.
Posted By: soon2bealarmtec
Date Posted: June 01, 2003 at 7:16 PM
Chris Luongo wrote:
Sometimes the dealer can enter programming and turn certain features on and off....check out your owner's manual or ask the dealer if parking light flash is possible.
It would also be pretty easy to make your parking lights flash whenever the car is locked or unlocked, if you don't mind doing a little wiring. You could use the motor wires going to the lock actuators, and use them to trigger a relay to pulse the parking or hazard lights. The only quirk is that they'll also pulse the lights even when you lock the doors without the remote.
got me confused if your alarm has parking light flash don't you think you just find the parking light wire and just tap it in so what all that for the wiring or you guys are talking about something else. -------------
Posted By: Chris Luongo
Date Posted: June 01, 2003 at 11:21 PM
soon2bealarmtec, he only has the factory Chrysler keyless, which is built into the Body Control Module (BCM)......... he doesn't have any aftermarket system in there. The factory keyless in his car doesn't flash the lights when locking or unlocking, and he wants to add that feature.
|