Print Page | Close Window

avital 4103xl door unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141916
Printed Date: April 23, 2024 at 8:23 AM


Topic: avital 4103xl door unlock

Posted By: jetfixerdw
Subject: avital 4103xl door unlock
Date Posted: October 26, 2016 at 7:59 PM

Hi all I have a question. I installed an avital 4103xl in my 2010 sonata. Everything works except when the car is remote started I cannot open the car doors. The lock and unlock works with the avital remote when the car is not running but if I remote start it, the key fob will not open the doors. It seems like a Hyundai thing that blocks the remote from working with the car running. Is there anyway to pulse the door trigger or disable the factory system so the door lock will work with the engine running? Thanks for any insight



Replies:

Posted By: chev104275
Date Posted: October 26, 2016 at 8:21 PM
How do you have the door locks wired ?

-------------
If i Can't Install it    I Don't need it   Joe




Posted By: Mark Mizenko
Date Posted: October 26, 2016 at 9:54 PM
You need to pulse the Lock Detection wire with unlock.




Posted By: jetfixerdw
Date Posted: October 27, 2016 at 9:05 AM
mark thanks for the reply. I looked at the wiring for my car in this forum and it doesn't how a lock detection wire. The only thing that shows is an alarm disarm wire in two places. Will this work to disarm the alarm momentarily to get the locks to work?




Posted By: Mark Mizenko
Date Posted: October 27, 2016 at 9:54 PM
Orange is your disarm. brown is lock detection (shows ground in the unlocked position) diode isolate and pulse with unlock. Do disarm also.   You may need to select double pulse unlock also, but it'll work, I do it all the time.




Posted By: jetfixerdw
Date Posted: October 29, 2016 at 10:14 AM
thanks mark I will give It a shot. Thank you for the feedback.





Print Page | Close Window