How is RAP supposed to work on DBALL2?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142063
Printed Date: April 28, 2024 at 11:11 PM
Topic: How is RAP supposed to work on DBALL2?
Posted By: timmerk
Subject: How is RAP supposed to work on DBALL2?
Date Posted: November 19, 2016 at 5:26 PM
I have a DBALL2 that claims to support RAP on a 2008 GMC Sierra 1500. I hooked up the RAP trigger wire to the door trigger per the manual, but RAP functionality still doesn't work. The second I shut down the truck, all console lights, radio, and power windows shut off. Any ideas?
Replies:
Posted By: kreg357
Date Posted: November 19, 2016 at 6:21 PM
The connection is for RAP Shutdown and appears to be working properly. On remote start shutdown the DB-ALL2 sends out a (-) pulse on the RAP Shutdown wire that simulates a door opening and closing quickly. This turns off the vehicles Retained Accessory Power function.
-------------
Soldering is fun!
Posted By: timmerk
Date Posted: November 19, 2016 at 7:53 PM
Ohh, ok.. I was thinking the DBALL2 kept ACC on until it detected the door open. I was wondering why I needed a door trigger when the DBALL2 already knows the status of the door via the CANBUS, so what you said makes perfect sense now. Thanks!
|