Print Page | Close Window

viper 5x06 how to check for dead

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142153
Printed Date: May 15, 2025 at 2:24 AM


Topic: viper 5x06 how to check for dead

Posted By: slowcpa
Subject: viper 5x06 how to check for dead
Date Posted: December 02, 2016 at 5:34 PM

79 jeep cherokee.
im using it only to actuate door locks. it worked for a few months and then the car was in the shop for a few months and had battery removed. now i get nothing when i press the remote. i have 12v at the black and red at the harness, so its getting power. no flashing led on antenna no clicks nothing. is there a way to check if its on/operating or to reboot it? I unplugged 12v for a few hours but that was no help.

should I ground the green door sensor wire and run the pink to the ignition to try to re-pair the remote or does it sound like its toast.

thanks


-------------
Martin


Print Page | Close Window