2005 Dodge Durango Remote Start Parts

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142182
Printed Date: May 17, 2025 at 1:26 AM

Topic: 2005 Dodge Durango Remote Start Parts

Posted By: at_viper
Subject: 2005 Dodge Durango Remote Start Parts
Date Posted: December 05, 2016 at 8:32 PM

I am looking at tackling a remote start install on my 05 Dodge Durango 4.6L V8, transponder key (head key).

I am looking at a refurbished Viper 4806 starter unit and a dball2 bypass. I would like to use a t-harness however, in the dball2 install guide it says that my vehicle is not compatible with the t-harness. Is there anything else I need?

What type of project am I getting into? I don't see much on the lines of guides or pictorials on 12volt for this vehicle. Does anyone have experience with this vehicle?

Thank you for your help,

Replies:

Posted By: rmotlyintrested
Date Posted: December 06, 2016 at 11:50 AM

There is a fairly good guide for the '05 Durango under vehicle wiring. Hope this helps.

Posted By: at_viper
Date Posted: December 06, 2016 at 12:13 PM

Thank you for the direction however, I have already reviewed this information. I struggle with following that guide as that vehicle is not equiped with SKIM or VTSS and my vehicle is. There is also no use of a bypass module (since there is no need for that vehicle).

Thank you again for the reply.

Posted By: at_viper
Date Posted: December 06, 2016 at 7:50 PM

The area's of main concern is the need for the relay and diode and if adding a Viper 4806 or Viper 5501 (4702v) changes the value of these items or if they are even needed at all?

Any help is much appreciated.