DEI 5x10 in 2011 Acura TSX navigation edition
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142189
Printed Date: May 17, 2025 at 6:26 PM
Topic: DEI 5x10 in 2011 Acura TSX navigation edition
Posted By: jjalarm
Subject: DEI 5x10 in 2011 Acura TSX navigation edition
Date Posted: December 06, 2016 at 1:23 PM
I have a question about diodes and 12 volt constant in my alarm installation. I want to add a fuse to my driver’s side fuse box and extend a 12 volt constant from it to my backup battery 520T and to the red wires on my tilt sensor (507M) and proximity sensor (508D)--all three of these will have fuse even though the fuses are not shown in the diagram below.
I was wondering, do I need to add diodes to separate the 12 volt constant from the 520T, 507M, and 508D, such as shown in my diagram, or are these diodes not needed?
Here is my wiring diagram:
-------------
.
I was wondering, do I need to add diodes to separate the 12 volt constant from the 520T, 507M, and 508D, such as shown in my diagram, or are these diodes not needed?
Here is my wiring diagram:
-------------
.
Replies:
Posted By: bogucki
Date Posted: December 12, 2016 at 2:37 AM