Print Page | Close Window

wait to start, 98 ram diesel, cm800 compustar

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142199
Printed Date: May 18, 2025 at 1:18 PM


Topic: wait to start, 98 ram diesel, cm800 compustar

Posted By: b_buddd
Subject: wait to start, 98 ram diesel, cm800 compustar
Date Posted: December 08, 2016 at 3:19 PM

hi everyone, I have a 98 ram diesel and a cm800 compustar remote start. it has a delay to start up to 18 seconds. and no "wait to start" input. 18 seconds not enough time for my truck. I would like to use the wait to start wire. can any one show or tell me example of how this is connected to the remote starter and the truck? do I use relays to connect the wait to start wire tooo.....? any help would be appreciated. I learn best from diagrams :) and yes I thought about the op500, but its expensive.

thanks!!


Print Page | Close Window