cant program dball2 2015 hyundai sonata
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142220
Printed Date: April 29, 2024 at 2:51 AM
Topic: cant program dball2 2015 hyundai sonata
Posted By: dcman41
Subject: cant program dball2 2015 hyundai sonata
Date Posted: December 11, 2016 at 1:48 PM
Having trouble programming this module.Installed it with a cliford 470.4x. Found all the corrrect wires but when i turn the key to the on position,the light changes from red to solid orange and never flashes green and then shuts off like it says. The only thing i noticed was in the dball2 type 2 wiring it says K-line is blue pin 12 of obd2 connector but mine was blue and black. Any ideas?
Update:Car sucessfully remote starts with out being able to program the module correctly? I was able to program tach thru d2d. I find it odd i was able to remote start it but what i did notice is that while the remote start is running the red led flashes 5 times telling me that K-line is not detected. Factory fob will lock and unlock the clifford brain. Clifford fob will NOT lock or unlock the doors, or pop the trunk like its supposed to via d2d but it will show hood and door status.
Replies:
Posted By: dcman41
Date Posted: December 11, 2016 at 4:02 PM
figured it out. Module needed to be reflashed for some reason.
|