2006 Scion tC, Door Lock, Remote Starter, Bypass
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142233
Printed Date: July 14, 2025 at 7:01 PM
Topic: 2006 Scion tC, Door Lock, Remote Starter, Bypass
Posted By: thebull369
Subject: 2006 Scion tC, Door Lock, Remote Starter, Bypass
Date Posted: December 13, 2016 at 10:12 PM
Hello all... I am trying to wrap up a remote car starter install for a Scion tC (Automatic). The one thing I do not have working on the remote starter is the door locks. I have read on several posts and install sites the following wiring spec for the Lock and Unlock:
Power Lock green to blue - driver kick, 20 pin plug, pin 15
Notes: Meter this wire while turning the key in the driver door key cylinder.
Power Unlock purple to pink (double pulse) - driver kick, 20 pin plug, pin 14
The issue I have is I cant find these wires anywhere in the Driver side kick panel. Does anyone have a picture or something of where these connectors are located?
Appreciate the help in advance.
Replies:
Posted By: thebull369
Date Posted: December 13, 2016 at 10:23 PM
Hello,
I am installing a XK05 PKTI Bypass Module with my Python 4103P. I am using the wire to wire method versus the D2D method to hook this up. The issue I am having is I cannot get the XK05 to be programmed. I have the device where the red light is on, I put the key in to the ignition and the XK05 never flashes or does anything. To my knowledge I have hooked up everything correctly. Anyone have any ideas on what might be going on?
Thanks in advance.
Posted By: thebull369
Date Posted: December 14, 2016 at 2:08 PM
I have the bypass issue working now (needed a new bypass module). Just need to figure out the door wiring... ANyone have any ideas?
|