2005 Camry, Bulldog RS82B remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142239
Printed Date: May 06, 2024 at 2:11 AM
Topic: 2005 Camry, Bulldog RS82B remote start
Posted By: cheezewhiz x
Subject: 2005 Camry, Bulldog RS82B remote start
Date Posted: December 14, 2016 at 3:52 PM
Hey every one, got a 2005 toyota camry le with keyless entry. Purchased a bull dog rs82b. I got it wired to the ignition switch, and I wired the 200ma ground wire to what i believe is the blue key sense wire right next to the ignition switch. My problem is, it starts up and only runs for couple minutes and start back up again, and again and again. Only seems to work some what right with the key in the ignition, turned to the on position. Any input would be awesome thanks!
Replies:
Posted By: cheezewhiz x
Date Posted: December 15, 2016 at 7:40 AM
Do i have to hook up the tach wire??? Anyone?
Posted By: silvercivicsir
Date Posted: December 15, 2016 at 12:48 PM
Yes the Tach wire is your friend and you should hook it up.
Posted By: cheezewhiz x
Date Posted: December 15, 2016 at 12:59 PM
Thanks!!
Posted By: cheezewhiz x
Date Posted: December 15, 2016 at 3:07 PM
Ok so i hookes up the tach, renote start works but now i dont have acc and now i lost my tach at the cluster....
Posted By: cheezewhiz x
Date Posted: December 16, 2016 at 2:19 PM
Ok i fixed the tach issue, just a bad connection, i cant seem to get the accessories to work now on the remote start. And the battery doesnt charge using the remote start, it looks like the anti theft is kicking on. Some one please help...
Posted By: smokeman1
Date Posted: December 16, 2016 at 8:46 PM
Check the fuses, check the connections. Connections soldered or T-Tap?
Would help if you listed all of your connections from the remote starter to the car.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: cheezewhiz x
Date Posted: December 16, 2016 at 9:18 PM
Soldered, think i found the issue today, seems to be an additional accessory wire separate from the ignition switch. That keeps the alternator and accessories working. I verfied this by supplying power with my power probe while running the car with the remote start. Its a white wire behind the fuse box driver side dash. Uses 10 amp fuse listed as gauge i believe it was.
|