2004 Dodge Ram 2500 5.7l Hemi remote start instl
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142316
Printed Date: April 26, 2024 at 3:24 AM
Topic: 2004 Dodge Ram 2500 5.7l Hemi remote start instl
Posted By: stormyj
Subject: 2004 Dodge Ram 2500 5.7l Hemi remote start instl
Date Posted: December 27, 2016 at 4:38 PM
Hi all,
Attempting an install on above vehicle. excel file has connections from the autopage rs-730a and the vehicle and where I think they should go. There will be some diodes on door switches and a few resistors I believe. If any pros can take a look and see if there is anything I missed or something i need to add, I would greatly appreciate it. I will be checking voltage as I go.
thanks
Jim
Excel file
https://www.filehosting.org/file/details/629157/ram2500connections.xlsx
-------------
Thanks
Replies:
Posted By: stormyj
Date Posted: December 27, 2016 at 4:45 PM
Also for the door locks.
Door locks are a 1-wire system, the lock requires a Neg thru a 820 ohm resistor and unlock requres a Neg thru a 330 ohm resistor. Some units might need 2 ea 775 relays
-------------
Thanks
Posted By: kreg357
Date Posted: December 28, 2016 at 8:47 PM
Get a Direct 451M door lock module. They cost $9 and include an assortment of resistors. Makes life easy.
Could you post the Excel file? I don't mind looking it over but really don't want to give them my email address...
-------------
Soldering is fun!
Posted By: stormyj
Date Posted: December 31, 2016 at 11:55 AM
I dont think I can upload a file. Not a silver or gold member.
-------------
Thanks
Posted By: kreg357
Date Posted: December 31, 2016 at 12:56 PM
Cut and past might work. Even manually typing it in, if you would like the Forum members to review it.
-------------
Soldering is fun!
|