Code Alarm D2D port
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142326
Printed Date: April 20, 2024 at 1:59 AM
Topic: Code Alarm D2D port
Posted By: specs
Subject: Code Alarm D2D port
Date Posted: December 28, 2016 at 10:21 PM
Doing an install for a friend...2006 Nissan Altima 4 cyl auto.He has supplied me with a CA5354 and XK09 bypass. Is it OK to use this combination in d2d? Reason I ask is that the dbi port on the Code Alarm looks like it accepts a slightly different style plug than what the XK09 d2d harness offers...maybe more intended for a flashlogic bypass? Thanks for any input...Al
Replies:
Posted By: bat9905
Date Posted: December 29, 2016 at 2:29 AM
I did it with a data cable meant to work with dei alarm remote start using a audiovox . I just used a razor knife and cut away 2 small ridgesansit went in and worked . As I'm pretty sure pin layout is the same
-------------
bat9905
Posted By: specs
Date Posted: December 29, 2016 at 7:33 AM
Thanks bat.....I don't have any problem trimming the tabs on the connector to ensure proper fit, just wanted confirmation on the pin arrangement being the same between the two (12v,neg,rx,tx)? Thanks, Al
|