Print Page | Close Window

2002 Honda CRV w/ Viper 4806v

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142373
Printed Date: May 03, 2024 at 2:21 AM


Topic: 2002 Honda CRV w/ Viper 4806v

Posted By: splitfyre
Subject: 2002 Honda CRV w/ Viper 4806v
Date Posted: January 04, 2017 at 7:05 PM

Geetings the12volt community!

I recently just got my Viper 4806v remote starter/keyless system installed by a colleague, with only one issue that bothers me: I lost the priority unlock feature with the Viper remote.

Still works with my OEM keyfob, but not with the Viper. I asked him if that's normal, and he said it's because my Viper unit does not have an option for priority unlock for Hondas/Acuras (Because I told him when he installed a Viper 4204 on my wife's Corolla, it kept the priority unlock).

He mostly installs Compustar systems (Because that's what he sells), so would it be that he just doesn't want to figure out how to wire it properly?

He also didn't install the hood switch (Which doesn't really bother me), but can anyone walk me through how to wire it up because I want to install it when I have spare time.

Sorry for the long post.
Thanks in advance to anyone that will help!

-Jan



Replies:

Posted By: smokeman1
Date Posted: January 04, 2017 at 7:49 PM
You are talking that it unlocks all the doors at the same time?
And you want it to unlock only the drivers door?

What bypass was installed?

If during remote start, you open the hood, does it kill the remote start? Might have used a factory hood wire.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation




Posted By: splitfyre
Date Posted: January 04, 2017 at 8:03 PM
smokeman1 wrote:

You are talking that it unlocks all the doors at the same time?
And you want it to unlock only the drivers door?

What bypass was installed?

If during remote start, you open the hood, does it kill the remote start? Might have used a factory hood wire.


Yes, now with the Viper remote it unlocks all doors with one press. If possible, I want to get priority unlock back. Not really sure what brand bypass he used though.

The hood switch, he didn't install totally because I still have it in the box. Really not a big deal to me if it's installed or not, I just want to learn how to install it myself.




Posted By: splitfyre
Date Posted: January 20, 2017 at 7:04 PM
Anyone else want to chime in?posted_image




Posted By: silvercivicsir
Date Posted: January 20, 2017 at 9:42 PM
kinda correct,Your CRV should have a YELLOW /GREEN for driver unlock.. but the viper doesn't have a individual drivers priority unlock wire. If you are ok with using an "aux" button you could hook it up to have drivers priority (ie hook up the drivers unlock to trunk pop), and keep the unlock button for all doors.. but honestly I would just keep it as is.





Print Page | Close Window