08 Silverado 2500HD Duramax Factory Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142535
Printed Date: April 29, 2024 at 12:47 PM

Topic: 08 Silverado 2500HD Duramax Factory Remote Start

Posted By: aplusmiami
Subject: 08 Silverado 2500HD Duramax Factory Remote Start
Date Posted: February 03, 2017 at 8:12 PM

I have an 08 Duramax.I am looking to install a viper 2 way alarm. My question is; if I use the DBALL2 module, will it utilize the the Factory installed remote start function or do I need to cut the factory harness?

Also I am looking at the Viper 5305V 2 Way. Any other recommendations?

Replies:

Posted By: aplusmiami
Date Posted: February 03, 2017 at 9:16 PM

If I still need to tap into the car harness - Is this the T-Solution I need? THGM610

Posted By: sparkie
Date Posted: February 04, 2017 at 7:37 AM

If you want to retain a remote starter when adding an alarm, you will need to install a remote/alarm comb unit. There is no way to retain the factory remote start option as it would trigger any alarm system when activated.

-------------
sparky

Print Page | Close Window