2004 Jeep WJ Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142561
Printed Date: May 09, 2025 at 6:33 PM

Topic: 2004 Jeep WJ Remote Start

Posted By: elijah98
Subject: 2004 Jeep WJ Remote Start
Date Posted: February 06, 2017 at 1:01 PM

Hello,

I just installed an Excalibur RS-160-EDP+ remote start and a Fortin EVO-ALL bypass. They work great together being able to start my vehicle and use the factory alarm. I have one issue though, when running in remote start it obviously sees the vehicle as off so no electronics power on. This isnt an issue but my radiator fan wont run and it would run hot untill i turned it on to let it cool. I searched and cannot find anything on this issue so any ideas are open for discussion.

Thanks,
Eli

Replies:

Posted By: tdbaker021
Date Posted: February 06, 2017 at 4:10 PM

elijah98 wrote:

Hello,

I just installed an Excalibur RS-160-EDP+ remote start and a Fortin EVO-ALL bypass. They work great together being able to start my vehicle and use the factory alarm. I have one issue though, when running in remote start it obviously sees the vehicle as off so no electronics power on. This isnt an issue but my radiator fan wont run and it would run hot untill i turned it on to let it cool. I searched and cannot find anything on this issue so any ideas are open for discussion.

Thanks,
Eli

Did you connect both accessory wires?

Posted By: elijah98
Date Posted: February 06, 2017 at 7:00 PM

Nope that seems like it would be the issue. I knew it was going to be slmething like that. Rookie mistake ill connect it and report back. Thanks

Posted By: tdbaker021
Date Posted: February 17, 2017 at 4:20 PM

elijah98 wrote:

Nope that seems like it would be the issue. I knew it was going to be slmething like that. Rookie mistake ill connect it and report back. Thanks

Did that take care of the problem?