2013 highlander keystart/viper 4806v/ alcaads

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142659
Printed Date: May 02, 2024 at 5:09 PM

Topic: 2013 highlander keystart/viper 4806v/ alcaads

Posted By: wyciwug
Subject: 2013 highlander keystart/viper 4806v/ alcaads
Date Posted: February 22, 2017 at 9:04 PM

I got this diagram drawed up for the wirings for up coming car im going to do.

Can somebody correct me if im wrong please

Thanks

posted_image

-------------
DCD

Replies:

Posted By: wyciwug
Date Posted: February 23, 2017 at 11:31 AM

hello all

The Idata link wiring diagram is showing Parking light connection between Remote starter 4806v to car's white connector pin #18. Where do I find this wire from the Remote start? As for the trunk/lift gate (-) output, will that be the RED / white wire from the 24-pin Harness?

Thanks members.

-------------
DCD

Posted By: silvercivicsir
Date Posted: February 23, 2017 at 11:47 AM

it's the thick white wire from the viper brain (make sure to change it to negative)

Posted By: wyciwug
Date Posted: February 23, 2017 at 11:49 AM

The only thing I see is

Main Harness, 6-pin connector

H/5 White- Pin 30 of light flash relay.

What does this mean?

-------------
DCD

Posted By: silvercivicsir
Date Posted: February 23, 2017 at 3:46 PM

yup thats the wire you want to use, when you insert the fuse (under the cover), make sure to select negative light flash

Print Page | Close Window