Print Page | Close Window

install DSM300 wire to wire?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142719
Printed Date: March 28, 2024 at 12:23 PM


Topic: install DSM300 wire to wire?

Posted By: jryan15
Subject: install DSM300 wire to wire?
Date Posted: March 05, 2017 at 4:47 PM

Hi all,

So I've got a smart start and a dball on hand (neither hooked up yet). I would like to add a DSM300 to the system. It seems that the smart start only has one data port and both the DBALL and the DSM300 can use it. I'm trying to figure out which is the best way to connect the system. Connect the DBALL wire to wire to the smart start and the DSM300 through the data port or vice versa?

Also I should note that I don't have a key fob for the smart start so it'd be nice to use the DBALL 3-lock press to start the car using my factory fob.

I'd appreciate feedback on what'd be the best way to connect the system.

Thanks!






Print Page | Close Window