Print Page | Close Window

Clifford 330x1 Additional Sensors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142954
Printed Date: May 08, 2025 at 9:13 PM


Topic: Clifford 330x1 Additional Sensors

Posted By: ridgeee
Subject: Clifford 330x1 Additional Sensors
Date Posted: May 11, 2017 at 7:23 AM

Hi,

I'm in the UK and have a vehicle with a Clifford 330x1 installed. Now I'm looking to disable (simply unplug) the installed clifford ultrasonics and use this sensors port for the following additional senors: 508D Proximity, 504D Shock/Impact and 506T Glass Break.

Now I need to know if I can run the above daisy chained together from this port (I'm new to all this alarm stuff but understand that the port is mux/zone 4) and if so what the wiring setup would be and if any blocking diodes would be needed.

Thanks in advance.


Print Page | Close Window