Print Page | Close Window

01 Elantra keyless

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14324
Printed Date: July 15, 2025 at 8:43 PM


Topic: 01 Elantra keyless

Posted By: R983
Subject: 01 Elantra keyless
Date Posted: June 01, 2003 at 10:33 PM

Now i am aware that an actuator is needed to work with hyundai's central locking system.  My question is, with most 2 wire acuators what input is needed? are they positive to lock and negative to unlock? or both negative with a resistor to unlock?  the diagram ive seen is the 5 wire (reverse polarity ) with 2 relays. however both lock and unlock wires are connected to positive with no resistors present. is it simply just a neg. pulse and the actuator will just  move from whatever position its currently in?  Is this diagram accurate ?  https://www.bulldogsecurity.com/wires/images/actuatordia.htm

any help would be great  thnaks            Rich



-------------




Replies:

Posted By: Xtra
Date Posted: June 02, 2003 at 3:07 AM
That diagram is fine as is this one Actuators / Reverse Polarity
Thats assuming your alarm outputs negative cdl triggers.

The Elantra is a little tricky as it uses cables and no rods, although it can be done quite easily by connecting the acuator rod directly to the lock button.

Dan


Print Page | Close Window