Can I install the Clifford AG4 myself?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14326
Printed Date: July 12, 2025 at 2:59 PM

Topic: Can I install the Clifford AG4 myself?

Posted By: Legendguy19
Subject: Can I install the Clifford AG4 myself?
Date Posted: June 02, 2003 at 12:26 AM

Would I be able to install the AG4 with just me and a friend. I know a good amount about car audio and my friend has installed alarms before but not as high tech as the AG4 and not a remote start. Is it safe for me to try to install it, and more importantly can I do it properly? Any links to sites that can walk me through an install of it? Any help would be great!

Replies:

Posted By: robHI
Date Posted: June 02, 2003 at 5:01 AM

yes u can do it yourself. u gotta know all the wire u will be tapping into.

Posted By: nighthawk2k
Date Posted: June 02, 2003 at 9:16 PM

the avantguard 4 you can install yourself but won't be able to program all the features of the alarm system without the cliffnet software. Everything will have to be manually programmed. If you provide me with your e-mail address and what kind of car it's going into i will be able to provide you with a tech sheet and the installation manual for the AG4.

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installer posted_image

Posted By: 4 guage
Date Posted: July 02, 2003 at 3:16 AM

Hey Nighthawk I'm installing in a 1996 toyota tacoma. Thank you very much! My Email: olsen41@msn.com

Print Page | Close Window