won’t enter reservation mode after reset
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143366
Printed Date: April 20, 2024 at 12:41 AM
Topic: won’t enter reservation mode after reset
Posted By: ajent
Subject: won’t enter reservation mode after reset
Date Posted: July 14, 2017 at 7:32 PM
Hello,
I mistakenly pushed the wrong buttons on my pro t11 remote trying to program the compustar cm7000 so I reset everything back to default to be safe.
Instead it seems to have broken my reservation mode. The car stays running when I exit, but then the motor shuts off & doors lock but security doesn't arm and does not finish reservation mode.
Any idea what options should be changed on the cm7000?
Manual 2015 STi with push button start.
Thank you
Replies:
Posted By: dswift
Date Posted: July 19, 2017 at 11:23 AM
With a push to start ignition system, the installer should have changed Option 01-06-02.
So when you park, you engaged the E-brake and then you basically autostart the car. Then when you can get out and close the door behind you, the car will either lock the doors then shut down, or shut down and lock the doors.
-------------
"dont ground out!"
|