2017 Subaru Outback

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143473
Printed Date: May 07, 2025 at 9:52 AM

Topic: 2017 Subaru Outback

Posted By: resoof
Subject: 2017 Subaru Outback
Date Posted: August 18, 2017 at 11:29 AM

Fortin Evo-All
Viper 4706V
Smart Start

Can someone help me out with wiring in a 4x06 (Viper 4706v) and Evo-All. Looking at the Evo-All instructions its not clear which wires on the 4x06 I will need to hook up. Primarily refering to the 12Volt inputs. I know its an older unit but it was free.

Replies:

Posted By: resoof
Date Posted: August 18, 2017 at 12:31 PM

So disregard the 12 volt inputs, got that figured out.

What about a ground while running output and trunk status input, cant seem to figure which wires those would be.

Posted By: mgoetz74
Date Posted: August 18, 2017 at 1:36 PM

trunk status would only be used for a alarm system, the grounded while running output would be to activate the bypass module

Posted By: mgoetz74
Date Posted: August 18, 2017 at 1:42 PM

sorry forgot- lt. green/black........dash fuse box, rear, white 40 pin plug, pin 15 is the trunk pin wire

Print Page | Close Window