cm4200 program issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143477
Printed Date: May 06, 2025 at 12:29 PM

Topic: cm4200 program issue

Posted By: rboe8289
Subject: cm4200 program issue
Date Posted: August 19, 2017 at 3:12 AM

I have a cm4200 brain and a Ant1-WAM antenna with a 700R remote fcc VA5JR260A433
The brain clicks to accept programming but it will not accept the remote when i press the lock button
Also, does the blue wire from Jumper setting need to be attached to the corresponding setting or can it be left un-connected? I have it set for 2nd Ign but I do not have that so it is left un-connected.

-------------
DIY Enthusiast

Replies:

Posted By: rboe8289
Date Posted: August 19, 2017 at 3:13 AM

This is installed in a 2003 Mitsubishi Lancer

-------------
DIY Enthusiast

Print Page | Close Window