GMDLBP issue with programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143478
Printed Date: May 04, 2024 at 12:53 PM
Topic: GMDLBP issue with programming
Posted By: mukit
Subject: GMDLBP issue with programming
Date Posted: August 19, 2017 at 6:58 AM
I installed an Avital 4105 and Xpresskit GMDLBP into my 2003 avalanche. I have constant 12v to the red wire, grounded the unit to the chassis, purple wire to pin 2 of the dlc, brown wire to the pink wire of the remote start, green and blue wires from to the corresponding wires of the remote start unit. The vehicle starts and runs fine but the door locks do not work. When I push lock or unlock on the fob the Xpresskit interface LED lights up but nothing happens. I have reset the xpresskit and made sure I properly selected type 4 by counting the flashes.
Any help would greatly be appreciated
-------------
2003 Avalanche
|