Command Start CS 310 Remote Programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143508
Printed Date: May 03, 2025 at 1:28 PM

Topic: Command Start CS 310 Remote Programming

Posted By: mycolon
Subject: Command Start CS 310 Remote Programming
Date Posted: August 27, 2017 at 5:25 PM

Hi
I just picked up an 02 Toyota Tundra with a Command Start CS 310 remote start system installed. The remote key fob will not communicate with the system. I installed a new battery in the remote with no change. I then tried to program the remote by first flashing the hood pin switch. When I held then tapped the switch my park lights turned on for a second and then go out not giving me the chance to program the remote. Any ideas what I may be doing wrong?

Print Page | Close Window